A debian Jessie (8) is required, more recent version (strech or Ubuntu 16) can be used but some patches in package name are then needed

• Create an account acqilc with sudoers capability
• download https://raw.githubusercontent.com/mirabitl/lydaq/master/lydaq_install
• execute it with
  • source lydaq_install

The code is installed in /opt/lydaq and /opt/zdaq . Binaries and libraries are in /op/dhcal/[bin/lib] .

• One version of ROOT [5.4] is recompiled, it may take one hour depending on the computer CPU.
• During the installation a passphrase is required, use the usual acqilc one.

The description and configuration of all processes is described in a JSON file. It should be edit and then install in the Oracle database host in the CCIN2P3.

• HOSTS a map of computer . Each computer is a name and a vector of programs
• NAME the unique name of the configuration

Each program is defined by a set of tags

• ARGS array of arguments of the program
• ENV array of environnement variables
  • The WEBPORT variable must be defined for each application
  • The INSTANCE varaible is needed if more than one application of same kind is running on the same PC
• NAME Name of the program, the name are specific to each daemon and are used by the run control provided. If you wish to use it keep the name of the following example
• PROGRAM the complete path to the binary
• PARAMETER a set of parameter for the application. Each application has specific parameters

• “builderAddress”: “tcp:/\/lyosdhcal9:5556”, It is the address on which data are collected (builder)
• “dbcache”: “tcp:/\/lyosdhcal9:5555”, It is the address where DB data are published (dbserver)
• “detectorId”: 100, the detector Id for DIF data

• “device”: “DCCCCC01”, the FTDI device name

• “s_ctrlreg”: “0x815A1B40”, the control register used by all DIF

• “dif”: 48, Number of DIF (unused )
• “directory”: “/data/NAS/stageM2”, Directory for writing
• “processor”: a list of pluggins library that will process events
  • “binarywriter”, binary writer
  • “lydaq_pluggins_monitor”, duplicate event for monitoring
  • “lydaq_pluggins_rootwriter”, root writing
  • “lydaq_pluggins_lciowriter”, lcio writing
• “shmpath”: “/dev/shm/monitor”, Path use for monitor dupication
• “stream”: [“tcp:\/\/*:5556”] List of listening ports

• “mode”: “DB”, or “WEB” if you do not installed occi (arm pc)
• “path”: “/dev/shm/”, path wher binaries of configuration is stored
• “publish”: “tcp:\/\/*:5555”, publish port to DIFSERVER
• “state”: “TestChamberLPC”, the DB state

Each slow control application has 3 mandatory parameters:

• “TCPPort”: 5600, the publication port
• “location”: “DOME_STACK”, The location of the monitor hardware
• “period”: 30, the period of monitoring in second

{
"HOSTS": {
"lyoilcrpi02": [
{
"ARGS": [],
"ENV": [
"PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin",
"LD_LIBRARY_PATH=/usr/lib:/usr/local/lib:/opt/dhcal/lib:$LD_LIBRARY_PATH",
"WEBPORT=42000"
],
"NAME": "CCCSERVER",
"PARAMETER": {
"device": "DCCCCC01"
},
"PROGRAM": "/opt/dhcal/bin/lydaq_daemon_Sdcc"
},
{
"ARGS": [],
"ENV": [
"PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin",
"LD_LIBRARY_PATH=/usr/lib:/usr/local/lib:/opt/dhcal/lib:$LD_LIBRARY_PATH",
"WEBPORT=41000"
],
"NAME": "GPIO",
"PARAMETER": {
"device": "1"
},
"PROGRAM": "/opt/dhcal/bin/lydaq_daemon_GPIO"
},
{
"ARGS": [],
"ENV": [
"PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin",
"LD_LIBRARY_PATH=/usr/lib:/usr/local/lib:/opt/dhcal/lib:$LD_LIBRARY_PATH",
"WEBPORT=40000",
"INSTANCE=12"
],
"NAME": "DIFSERVER",
"PARAMETER": {
"builderAddress": "tcp://lyosdhcal9:5556",
"dbcache": "tcp://lyosdhcal9:5555",
"detectorId": 100
},
"PROGRAM": "/opt/dhcal/bin/lydaq_daemon_Dif"
}
],
"lyoilcrpi13": [
{
"ARGS": [],
"ENV": [
"LD_LIBRARY_PATH=/opt/dhcal/root/lib:/usr/lib:/usr/local/lib:/opt/dhcal/lib:$LD_LIBRARY_PATH",
"WEBPORT=31000"
],
"NAME": "HIH",
"PARAMETER": {
"TCPPort": 5600,
"location": "DOME_STACK",
"period": 30
},
"PROGRAM": "/opt/dhcal/bin/lydaq_daemon_hih8000"
}
],
"lyoilcrpi24": [
{
"ARGS": [],
"ENV": [
"LD_LIBRARY_PATH=/opt/dhcal/root/lib:/usr/lib:/usr/local/lib:/opt/dhcal/lib:$LD_LIBRARY_PATH",
"WEBPORT=31000"
],
"NAME": "BMP",
"PARAMETER": {
"TCPPort": 5600,
"location": "DOME_STACK",
"period": 30
},
"PROGRAM": "/opt/dhcal/bin/lydaq_daemon_Bmp"
},
{
"ARGS": [],
"ENV": [
"LD_LIBRARY_PATH=/opt/dhcal/root/lib:/usr/lib:/usr/local/lib:/opt/dhcal/lib:$LD_LIBRARY_PATH",
"WEBPORT=32000"
],
"NAME": "ZUP",
"PARAMETER": {
"TCPPort": 5610,
"device": "/dev/ttyUSB0",
"location": "DOME_STACK",
"period": 30,
"port": 1
},
"PROGRAM": "/opt/dhcal/bin/lydaq_daemon_Zup"
}
],
"lyosdhcal9": [
{
"ARGS": [],
"ENV": [
"LD_LIBRARY_PATH=/usr/lib:/usr/local/lib:/opt/dhcal/lib:$LD_LIBRARY_PATH",
"WEBPORT=45000"
],
"NAME": "FDAQ",
"PARAMETER": {
"s_ctrlreg": "0x815A1B40"
},
"PROGRAM": "/opt/dhcal/bin/lydaq_daemon_Control"
},
{
"ARGS": [],
"ENV": [
"LD_LIBRARY_PATH=/opt/dhcal/root/lib:/usr/lib:/usr/local/lib:/opt/dhcal/lib:$LD_LIBRARY_PATH",
"WEBPORT=51000"
],
"NAME": "WRITER",
"PARAMETER": {
"dif": 48,
"directory": "/data/NAS/stageM2",
"processor": [
"binarywriter",
"lydaq_pluggins_monitor",
"lydaq_pluggins_rootwriter",
"lydaq_pluggins_lciowriter"
],
"shmpath": "/dev/shm/monitor",
"stream": [
"tcp://*:5556"
]
},
"PROGRAM": "/opt/dhcal/bin/lydaq_daemon_Builder"
},
{
"ARGS": [],
"ENV": [
"LD_LIBRARY_PATH=/usr/lib:/usr/local/lib:/opt/dhcal/lib:$LD_LIBRARY_PATH",
"CONFDB=ILC/fFQeV52rQy@(DESCRIPTION_LIST=(LOAD_BALANCE=off)(FAILOVER=on)(DESCRIPTION=(CONNECT_TIMEOUT=5)(TRANSPORT_CONNECT_TIMEOUT=3)(RETRY_COUNT=3)(ADDRESS_LIST=(LOAD_BALANCE=on)(ADDRESS=(PROTOCOL=TCP)(HOST=ccscanovo.in2p3.fr)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=calice.in2p3.fr)))(DESCRIPTION=(CONNECT_TIMEOUT=5)(TRANSPORT_CONNECT_TIMEOUT=3)(RETRY_COUNT=3)(ADDRESS_LIST=(LOAD_BALANCE=on)(ADDRESS=(PROTOCOL=TCP)(HOST=ccscanodgvo.in2p3.fr)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=calice.in2p3.fr))))",
"CONFDB_WEB=cmsLyon/RPC_2008@ilcconfdb.ipnl.in2p3.fr",
"WEBPORT=44000"
],
"NAME": "DBSERVER",
"PARAMETER": {
"mode": "DB",
"path": "/dev/shm/",
"publish": "tcp://*:5555",
"state": "TestChamberLPC"
},
"PROGRAM": "/opt/dhcal/bin/lydaq_daemon_ConfigurationDB"
},
{
"ARGS": [],
"ENV": [
"LD_LIBRARY_PATH=/usr/lib:/usr/local/lib:/opt/dhcal/lib:$LD_LIBRARY_PATH",
"WEBPORT=36000"
],
"NAME": "FSLOW",
"PARAMETER": {
"account": "admin/admin@lyoac28",
"deviceName": "SY1527@DOMESTAGEM2",
"first": 0,
"last": 5,
"serverName": "tcp://*:5500"
},
"PROGRAM": "/opt/dhcal/bin/lydaq_daemon_Slow_Control"
},
{
"ARGS": [],
"ENV": [
"LD_LIBRARY_PATH=/opt/dhcal/root/lib:/usr/lib:/usr/local/lib:/opt/dhcal/lib:$LD_LIBRARY_PATH",
"WEBPORT=31000"
],
"NAME": "ISEG",
"PARAMETER": {
"TCPPort": 5600,
"address": "lyoilchv01.ipnl",
"first": 0,
"last": 55,
"location": "DOME_STACK",
"period": 120
},
"PROGRAM": "/opt/dhcal/bin/lydaq_daemon_Wiener"
}
]
},
"NAME": "chamber_stack_lpc_2"
}

In order to store data in the Oracle DB you need a login and password. Please contact Guillaume to get one if you don't know it.

Access the DAQ control page.

Go to Manage Configuration page,end of page and create New configuration

Choose your file and create. Then you must click once on your configuration to have it surrounded by a red line, i.e, it is available

With the same account goto ilcconfdb , you will have a list of all registered configuration

To access one go to one example where the last name is the name of the config.