daq_control_help
This is an old revision of the document!
daqcontrol.py Object
daqcmd.py script
usage: daqcmd.py [-h]
[--available | --app-info | --webstatus | --jc-create | --jc-kill | --jc-destroy | --jc-start | --jc-restart | --jc-status | --jc-info | --jc-appcreate | --daq-create | --daq-discover | --daq-setparameters | --daq-getparameters | --daq-forceState | --daq-services | --daq-state | --daq-initialise | --daq-configure | --daq-startrun | --daq-stoprun | --daq-destroy | --daq-difstatus | --daq-tdcstatus | --daq-evbstatus | --daq-dbstatus | --daq-downloaddb | --dif-setgain | --dif-setthreshold | --dif-ctrlreg | --feb-resettdc | --feb-calibdac | --feb-scurve | --feb-setvth | --feb-setmask | --feb-settdcmode | --feb-settdcdelays | --feb-lutcalib | --feb-lutdraw | --histo-draw | --trig-status | --trig-reset | --trig-pause | --trig-resume | --ecal-pause | --ecal-resume | --trig-spillon | --trig-spilloff | --trig-beam | --trig-spillregister | --trig-calibon | --trig-calibcount | --trig-rearm | --trig-hardreset | --trig-setregister | --trig-getregister | --trig-tdcreset | --slc-create | --slc-initialise | --slc-configure | --slc-start | --slc-stop | --slc-lvon | --slc-lvoff | --slc-lvstatus | --slc-hvstatus | --slc-vset | --slc-iset | --slc-rampup | --slc-hvon | --slc-hvoff | --slc-clearalarm | --slc-ptstatus | --slc-humstatus | --slc-ptcor]
[--config CONFIG] [--socks SOCKPORT] [--dbstate DBSTATE]
[--ctrlreg CTRLREG] [--version] [--state FSTATE]
[--clock CLOCK] [--directory DIRECTORY] [--vth VTH]
[--mask MASK] [--gain GAIN] [--B0 B0] [--B1 B1] [--B2 B2]
[--v0 V0] [--p0 P0] [--t0 T0] [--tdc TDC] [--channel CHANNEL]
[--first FIRST] [--last LAST] [--step STEP]
[--voltage VOLTAGE] [--current CURRENT] [--ramp RAMP]
[--account ACCOUNT] [--period PERIOD] [--spillon SPILLON]
[--spilloff SPILLOFF] [--lines LINES] [--host HOST]
[--name NAME] [--jobname JOBNAME] [--jobpid JOBPID]
[--value VALUE] [--address ADDRESS] [--active ACTIVE]
[--dead DEAD] [--asic ASIC] [--feb FEB]
[--dbversion DBVERSION] [-v] [--comment COMMENT]
optional arguments:
| Command | Description |
| -h, –help | show this help message and exit |
| –available | Check availability of daq,jobcontrol and slowcontrol |
| –app-info | Check availability of daq,jobcontrol and slowcontrol |
| –webstatus | Check availability of daq,jobcontrol,slowcontrol and |
| Ecal web servers | |
| –jc-create | Loads configuration in all jobcontrol process |
| –jc-kill | kill all running processes |
| –jc-destroy | delete all jobcontrol configuration |
| –jc-start | start all controled processes described in  DAQCONFIG file to the DAQ |
| –daq-getparameters | get the parameters described in $DAQCONFIG file to the DAQ |
| –daq-forceState | force the sate name of the FDAQ with the –state option, ex –forceState –state=DISCOVERED |
| –daq-services | Send INITIALISE/CONFIGURE transition to services application (MDCC,DB,BUILDER mainly) |
| –daq-state | display DAQ state |
| –daq-initialise | Initialise FDAQ, data source discovery and Builderfinal configuration |
| –daq-configure | Configure FDAQ, front end ASICs configuration |
| –daq-startrun | start the run –comment=“my comment” |
| –daq-stoprun | stop the run |
| –daq-destroy | destroy the readout, back to the PREPARED state |
| –daq-difstatus | display DAQ status of all SDHCAL DIF |
| –daq-tdcstatus | display DAQ status of all FEBCMS TDC |
| –daq-evbstatus | display event builder status |
| –daq-dbstatus | get current run and state from db |
| –daq-downloaddb | download the dbsate specified in –dbstate=state |
| –dif-setgain | change the gain of HARDROC2 and reconfigure chips with –gain=xxx |
| –dif-setthreshold | change the threholds of HARDROC2 and reconfigure chips with –B0=xxx –B1=yyy –B2=zzz |
| –dif-ctrlreg | set the SDHCAL DIF ctrlregister specified with –ctrlreg=register |
| –feb-resettdc | Send Reset to all FEB TDC |
| –feb-calibdac | Start a PETIROC calibdac run |
| –feb-scurve | Start a PETIROC scurve run |
| –feb-setvth | change the VTHTIME threshold of PETIROC2 andreconfigure chips with -vth=xxx |
| –feb-setmask | change the MASK of PETIROC2 reconfigure chips with -mask=xxx |
| –feb-settdcmode | change the trigger mode before starting the run with –value=1 (trigger Only)/0 (all) |
| –feb-settdcdelays | change the PETIROC mode before starting the run with –active=1-255, –dead=1-255 |
| –feb-lutcalib | Calibrate –tdc=i –channel=k |
| –feb-lutdraw | Calibrate –tdc=i –channel=k |
| –histo-draw | Draw histo –name=histo |
| –trig-status | display trigger (MDCC) counter status |
| –trig-reset | reset trigger (MDCC) counter |
| –trig-pause | trigger (MDCC) soft veto |
| –trig-resume | release trigger (MDCC) soft veto |
| –ecal-pause | (Obsolete) Ecal soft veto |
| –ecal-resume | (Obsolete) release Ecal soft veto |
| –trig-spillon | set spill nclock on with –clock=nc (20ns) |
| –trig-spilloff | set spill nclock off with –clock=nc (20ns) |
| –trig-beam | set beam length to nclock with –clock=nc (20ns) |
| –trig-spillregister | set the value of the spill register (FEB CMS) (32/64 for beamtest or cosmic) –value=xx |
| –trig-calibon | set the value of the calibon register (FEB calibration) –value=xx |
| –trig-calibcount | set the value of the calibcount (FEB calibration) register –value=xx |
| –trig-rearm | reload calib (FEB calibration) |
| –trig-hardreset | send a hard reset to mezzanines |
| –trig-setregister | set the value of the MDCC register –value=xx –address=yy |
| –trig-getregister | get the value of the MDCC register –address=yy |
| –trig-tdcreset | hard reset of TDC (FEB) counters |
| –slc-create | Send a CREATE transition to FSLOW app (parsing of configuration) |
| –slc-initialise | Send a INITIALISE transition to FSLOW (auto discovery and CREATE transition to all controlled apps) |
| –slc-configure | Send a CONFIGURE transition to FSLOW (configuration of all controlled apps) |
| –slc-start | Send a START transition to all monitorApplication controlled |
| –slc-stop | Send a STOP transition to all monitorApplication controlled |
| –slc-lvon | put Zup LV ON |
| –slc-lvoff | put Zup LV OFF |
| –slc-lvstatus | Dump LV status |
| –slc-hvstatus | display hvstatus of all channel of the wiener crate |
| –slc-vset | set the voltage V of channel i to k with –first=i –last=k –voltage=V |
| –slc-iset | set the current limit I (microA) of channel i to k with –first=i –last=k –current=I |
| –slc-rampup | set the ramp (V/S) of channel i to k with –first=i –last=k –ramp=r |
| –slc-hvon | set the voltage ON of channel i to k with –first=i –last=k |
| –slc-hvoff | set the voltage OFF of channel i to k with –first=i –last=k |
| –slc-clearalarm | Clear alarm of channel i to k with –first=i –last=k |
| –slc-ptstatus | display the P and T from the BMP183 readout |
| –slc-humstatus | display the Humidity and T from the HIH8000 readout |
| –slc-ptcor | display the needed voltage for –v0=v –p0=p (mbar) –t0=t (K) |
| parameters | Description |
| –config CONFIG | json config file |
| –socks SOCKPORT | use SOCKS port |
| –dbstate DBSTATE | set the dbstate |
| –ctrlreg CTRLREG | set the Control register in hexa |
| –version | show program's version number and exit |
| –state FSTATE | set the Daq state |
| –clock CLOCK | set the number of 20 ns clock |
| –directory DIRECTORY | shm publisher directory |
| –vth VTH | set the vth for chips |
| –mask MASK | set the mask for chips |
| –gain GAIN | set the gain for chips |
| –B0 B0 | set the B0 for chips |
| –B1 B1 | set the B1 for chips |
| –B2 B2 | set the B2 for chips |
| –v0 V0 | reference hv |
| –p0 P0 | reference P |
| –t0 T0 | reference T |
| –tdc TDC | set the tdc process |
| –channel CHANNEL | set the hvchannel |
| –first FIRST | set the first hvchannel |
| –last LAST | set the last hvchannel |
| –step STEP | set the step of the calibration |
| –voltage VOLTAGE | set the hv voltage |
| –current CURRENT | set the hv current |
| –ramp RAMP | set the hv ramp |
| –account ACCOUNT | set the Slow Control mysql account |
| –period PERIOD | set the temporistaion period (s) |
| –spillon SPILLON | spill on |
| –spilloff SPILLOFF | spilloff |
| –lines LINES | set the number of lines to be dump |
| –host HOST | host for log |
| –name NAME | application name |
| –jobname JOBNAME | job name |
| –jobpid JOBPID | job pid |
| –value VALUE | value to pass |
| –address ADDRESS | address to pass |
| –active ACTIVE | active time of Petiroc |
| –dead DEAD | dead time of Petiroc |
| –asic ASIC | asic header of Petiroc |
| –feb FEB | FEB id |
| –dbversion DBVERSION | DB state version |
| -v, –verbose | Raw Json output |
| –comment COMMENT | Comment for start run |
daq_control_help.1578923201.txt.gz · Last modified: 2021/07/10 23:20 (external edit)
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
