This is an old revision of the document!
Table of Contents
Step by Step: Instruction
Go to back: dataQuest: Analysis - instruction
PREPARATION
I. source ~/CMS-RPC/dataQuest/scripts/create_myDir.sh myName
When you create your dir:
check that cd /~CMS-RPC/dataQuest/myName exist and you have two .csv files.
Now you can start running the code!
ROUTINE
cd ~/CMS-RPC/dataQuest/bin
./dq --type=card ../cards/myName/default.csv --dir=myName
either you run with the default file
Or if you want to change the parameters for a given run
N.B: if you want to keep the HV or the threshold information associated to the run and get the corresponding appropriate plots when you perform a scan then you have to provide it in the values parameter as in the following examples:
1) ./dq --type=card ../cards/myName/default.csv --dir=myName --runs=741417 --values=6700 --comments=HVOnePoint
in the previous command, we produce the plots for the run number 741417. The root files will contain the information on the HV and also your comment «HVOnePoint».
2) ./dq –type=card ../cards/myName/default.csv --dir=myName --runs=741383 --values=550 --comments=ThresholdOnePoint
in the previous command we produce the plots for the run number 741383. The root files will contain the information on the threshold and also your «MyComment = ThresholdOnePoint».
3) ./dq --type=card ../cards/myName/default.csv --dir=myName --runs='741417|741419' --values='6700|6900' --comments=HVTwoPoints
If you want to analyse several runs (not in row). Please note the ‘x|y‘ structure.
4) ./dq --type=card ../cards/myName/default.csv --dir=myName --runs='741417>741420' --values='6700|6800|6900|7000' --comments=HVTwoPoints
If you want to analyse several runs (in a row).
N.B: myComment helps to keep the information of the work to be done (scan,…etc).
RESULTS
After running the code, a root file called analysis.root will be created in ~/CMS-RPC/dataQuest/results/myName.
