====== Old DAQ Control ======

===== Alias daqcontrol or slowcontrol =====

Example of alias one can define to use //daqcmd.py// script

==== Slow Control ====

  alias slccontrol="export DAQLOGIN=cmsLyon:RXXX_YYY;export DAQURL=https://ilcconfdb.yyy.fr/config-content/slow_control_dome_2;/opt/lydaq/qt/daqcmd.py"

====  Daq control with Oracle ====

  alias daqcontrol="export DAQLOGIN=cmsLyon:RXXX_YYY;export DAQURL=https://ilcconfdb.yyyy.fr/config-content/diftest_bakelite_2;/opt/lydaq/qt/daqcmd.py"		

==== Daq control with MongoDB ====


  alias dqmg="export MGDBLOGIN=acqilc/RXXX_YYY@lyozzzzz:27017@LYONROC;export DAQMONGO=diftest_bakelite:2;/opt/lydaq/qt/daqcmd.py"


===== daqcontrol.py Object =====

All the access to the daq is described in an object called //fdaqClient// in the //daqcontrol// module.

Detailed documentation can be found in {{ :pdf:pdf:daqcontrol.pdf |}}

The object is either used in command line (//daqcmd.py// script or with a pyQt interface (//daqqt.py//)

===== daqcmd.py script =====

The main script to access with command line the DAQ is //daqcmd.py//:


   usage: daqcmd.py [-h]
                 [--available | --app-info | --webstatus | --jc-create | --jc-kill | --jc-destroy | --jc-start | --jc-restart | --jc-status | --jc-info | --jc-appcreate | --daq-create | --daq-discover | --daq-setparameters | --daq-getparameters | --daq-forceState | --daq-services | --daq-state | --daq-initialise | --daq-configure | --daq-startrun | --daq-stoprun | --daq-destroy | --daq-difstatus | --daq-tdcstatus | --daq-evbstatus | --daq-dbstatus | --daq-downloaddb | --dif-setgain | --dif-setthreshold | --dif-ctrlreg | --feb-resettdc | --feb-calibdac | --feb-scurve | --feb-setvth | --feb-setmask | --feb-settdcmode | --feb-settdcdelays | --feb-lutcalib | --feb-lutdraw | --histo-draw | --trig-status | --trig-reset | --trig-pause | --trig-resume | --ecal-pause | --ecal-resume | --trig-spillon | --trig-spilloff | --trig-beam | --trig-spillregister | --trig-calibon | --trig-calibcount | --trig-rearm | --trig-hardreset | --trig-setregister | --trig-getregister | --trig-tdcreset | --slc-create | --slc-initialise | --slc-configure | --slc-start | --slc-stop | --slc-lvon | --slc-lvoff | --slc-lvstatus | --slc-hvstatus | --slc-vset | --slc-iset | --slc-rampup | --slc-hvon | --slc-hvoff | --slc-clearalarm | --slc-ptstatus | --slc-humstatus | --slc-ptcor]
                 [--config CONFIG] [--socks SOCKPORT] [--dbstate DBSTATE]
                 [--ctrlreg CTRLREG] [--version] [--state FSTATE]
                 [--clock CLOCK] [--directory DIRECTORY] [--vth VTH]
                 [--mask MASK] [--gain GAIN] [--B0 B0] [--B1 B1] [--B2 B2]
                 [--v0 V0] [--p0 P0] [--t0 T0] [--tdc TDC] [--channel CHANNEL]
                 [--first FIRST] [--last LAST] [--step STEP]
                 [--voltage VOLTAGE] [--current CURRENT] [--ramp RAMP]
                 [--account ACCOUNT] [--period PERIOD] [--spillon SPILLON]
                 [--spilloff SPILLOFF] [--lines LINES] [--host HOST]
                 [--name NAME] [--jobname JOBNAME] [--jobpid JOBPID]
                 [--value VALUE] [--address ADDRESS] [--active ACTIVE]
                 [--dead DEAD] [--asic ASIC] [--feb FEB]
                 [--dbversion DBVERSION] [-v] [--comment COMMENT]

   optional arguments:

| Command       | Description	|
|-h, --help        |   show this help message and exit|
|--available       |  Check availability of daq,jobcontrol and slowcontrol|
|--app-info        |  Check availability of daq,jobcontrol and slowcontrol|
|--webstatus       |  Check availability of daq,jobcontrol,slowcontrol and|
|                  |  Ecal web servers|
|--jc-create       |  Loads configuration in all jobcontrol process|
|--jc-kill         |  kill all running processes|
|--jc-destroy      |  delete all jobcontrol configuration|
|--jc-start        |  start all controled processes described in $DAQCONFIG json file variable|
|--jc-restart      |  restart one job with --jobname=name --jobpid=pid  --host=hostname|
|--jc-status       |  show the status all controled processes or of the  process specified in --name=PROC|
|--jc-info         |  show the status all controled processesof the host  specified in --host=Host|
|--jc-appcreate    |  Create all ZDAQ app on all hosts|
|--daq-create      |  Send the CREATE transition to the FDAQ process (i.e parameters loads of all controlled application)|
|--daq-discover    |  FDAQ scans controlled application and forward CREATE transition to all controlled processes|
|--daq-setparameters|  send the parameters described in $DAQCONFIG file to the DAQ|
|--daq-getparameters|  get the parameters described in $DAQCONFIG file to the DAQ|
|--daq-forceState  |  force the sate name of the FDAQ with the --state  option, ex --forceState --state=DISCOVERED|
|--daq-services    |  Send INITIALISE/CONFIGURE transition to services application (MDCC,DB,BUILDER mainly)|
|--daq-state       |  display DAQ state|
|--daq-initialise  |  Initialise FDAQ, data source discovery and Builderfinal configuration|
|--daq-configure   |  Configure FDAQ, front end ASICs configuration|
|--daq-startrun    |  start the run --comment="my comment"|
|--daq-stoprun     |  stop the run|
|--daq-destroy     |  destroy the readout, back to the PREPARED state|
|--daq-difstatus   |  display DAQ status of all SDHCAL DIF|
|--daq-tdcstatus   |  display DAQ status of all FEBCMS TDC|
|--daq-evbstatus   |  display event builder status|
|--daq-dbstatus    |  get current run and state from db|
|--daq-downloaddb  |  download the dbsate specified in --dbstate=state|
|--dif-setgain     |  change the gain of HARDROC2 and reconfigure chips with --gain=xxx|
|--dif-setthreshold|  change the threholds of HARDROC2 and reconfigure chips with --B0=xxx --B1=yyy --B2=zzz|
|--dif-ctrlreg     |  set the SDHCAL DIF ctrlregister specified with --ctrlreg=register|
|--feb-resettdc    |  Send Reset to all FEB TDC|
|--feb-calibdac    |  Start a PETIROC calibdac run|
|--feb-scurve      |  Start a PETIROC scurve run|
|--feb-setvth      |  change the VTHTIME threshold of PETIROC2 andreconfigure chips with -vth=xxx|
|--feb-setmask     |  change the MASK of PETIROC2 reconfigure chips with -mask=xxx|
|--feb-settdcmode  |  change the trigger mode before starting the run with --value=1 (trigger Only)/0 (all)|
|--feb-settdcdelays|  change the PETIROC mode before starting the run with --active=1-255, --dead=1-255|
|--feb-lutcalib    |  Calibrate --tdc=i --channel=k|
|--feb-lutdraw     |  Calibrate --tdc=i --channel=k|
|--histo-draw      |  Draw histo --name=histo|
|--trig-status     |  display trigger (MDCC) counter status|
|--trig-reset      |  reset trigger (MDCC) counter|
|--trig-pause      |  trigger (MDCC) soft veto|
|--trig-resume     |  release trigger (MDCC) soft veto|
|--ecal-pause      |  (Obsolete) Ecal soft veto|
|--ecal-resume     |  (Obsolete) release Ecal soft veto|
|--trig-spillon    |  set spill nclock on with --clock=nc (20ns)|
|--trig-spilloff   |  set spill nclock off with --clock=nc (20ns)|
|--trig-beam       |  set beam length to nclock with --clock=nc (20ns)|
|--trig-spillregister |  set the value of the spill register (FEB CMS) (32/64 for beamtest or cosmic) --value=xx|
|--trig-calibon    |  set the value of the calibon register (FEB calibration) --value=xx|
|--trig-calibcount |  set the value of the calibcount (FEB calibration) register --value=xx|
|--trig-rearm      |  reload calib (FEB calibration)|
|--trig-hardreset  |  send a hard reset to mezzanines|
|--trig-setregister|  set the value of the MDCC register --value=xx --address=yy|
|--trig-getregister|  get the value of the MDCC register --address=yy|
|--trig-tdcreset   |  hard reset of TDC (FEB) counters|
|--slc-create      |  Send a CREATE transition to FSLOW app (parsing of configuration)|
|--slc-initialise  |  Send a INITIALISE transition to FSLOW (auto discovery and CREATE transition to all controlled apps)|
|--slc-configure   |  Send a CONFIGURE transition to FSLOW (configuration of all controlled apps)|
|--slc-start       |  Send a START transition to all monitorApplication controlled|
|--slc-stop        |  Send a STOP transition to all monitorApplication controlled|
|--slc-lvon        |  put Zup LV ON|
|--slc-lvoff       |  put Zup LV OFF|
|--slc-lvstatus    |  Dump LV status|
|--slc-hvstatus    |  display hvstatus of all channel of the wiener crate|
|--slc-vset        |  set the voltage V of channel i to k with --first=i --last=k --voltage=V|
|--slc-iset        |  set the current limit I (microA) of channel i to k with --first=i --last=k --current=I|
|--slc-rampup      |  set the ramp (V/S) of channel i to k with --first=i --last=k --ramp=r|
|--slc-hvon        |  set the voltage ON of channel i to k with --first=i --last=k|
|--slc-hvoff       |  set the voltage OFF of channel i to k with --first=i --last=k|
|--slc-clearalarm  |  Clear alarm of channel i to k with --first=i --last=k|
|--slc-ptstatus    |  display the P and T from the BMP183 readout|
|--slc-humstatus   |  display the Humidity and T from the HIH8000 readout|
|--slc-ptcor       |  display the needed voltage for --v0=v --p0=p (mbar)  --t0=t (K)|

| parameters       | Description|
|--config CONFIG   |  json config file|
|--socks SOCKPORT  |  use SOCKS port|
|--dbstate DBSTATE |  set the dbstate|
|--ctrlreg CTRLREG |  set the Control register in hexa|
|--version         |  show program's version number and exit|
|--state FSTATE    |  set the Daq state|
|--clock CLOCK     |  set the number of 20 ns clock|
|--directory DIRECTORY|  shm publisher directory|
|--vth VTH         |  set the vth for chips|
|--mask MASK       |  set the mask for chips|
|--gain GAIN       |  set the gain for chips|
|--B0 B0           |  set the B0 for chips|
|--B1 B1           |  set the B1 for chips|
|--B2 B2           |  set the B2 for chips|
|--v0 V0           |  reference hv|
|--p0 P0           |  reference P|
|--t0 T0           |  reference T|
|--tdc TDC         |  set the tdc process|
|--channel CHANNEL |  set the hvchannel|
|--first FIRST     |  set the first hvchannel|
|--last LAST       |  set the last hvchannel|
|--step STEP       |  set the step of the calibration|
|--voltage VOLTAGE |  set the hv voltage|
|--current CURRENT |  set the hv current|
|--ramp RAMP       |  set the hv ramp|
|--account ACCOUNT |  set the Slow Control mysql account|
|--period PERIOD   |  set the temporistaion period (s)|
|--spillon SPILLON |  spill on|
|--spilloff SPILLOFF|  spilloff|
|--lines LINES     |  set the number of lines to be dump|
|--host HOST       |  host for log|
|--name NAME       |  application name|
|--jobname JOBNAME |  job name|
|--jobpid JOBPID   |  job pid|
|--value VALUE     |  value to pass|
|--address ADDRESS |  address to pass|
|--active ACTIVE   |  active time of Petiroc|
|--dead DEAD       |  dead time of Petiroc|
|--asic ASIC       |  asic header of Petiroc|
|--feb FEB         |  FEB id|
|--dbversion DBVERSION|  DB state version|
|-v, --verbose    |  Raw Json output|
|--comment  COMMENT |  Comment for start run|