IP2I CMS Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== New firmware (v2) on both chambers ======
{{ :gifpp_daq.pdf |LYDAQ for dummies }}
===== Mapping return chamber =====

**Channel 0 is the TDC of trigger**
The strip 12 does not exist.  in this mapping

For calibration you got TDC (channel -1) to Petiroc 
<code>
      firmwaret=[31,29,27,25,23,22,21,20,19,18,17,16,15,14,13,12,11,10,9,8,7,6]
</code>

and TDC to strip

<code>
{"id":10,"chamber":1,"first":741000,"last":743000,
         "triggerMean":-180.,"triggerMin":-230.,"triggerMax":-150.,
         "stripShift":0,"polarity":1,
         "tdc2strip":[12,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12],
         "side":[1,0,1,0,1,0,1,0,1,0,1,0,1,0,1,0,1,0,1,0,1,0,1,0],
         "delta":[0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0]
        },
        {"id":14,"chamber":1,"first":741000,"last":743000,
         "triggerMean":-180.,"triggerMin":-230.,"triggerMax":-150.,
         "stripShift":11,"polarity":-1,
         "tdc2strip":[12,11,11,10,10,9,9,8,8,7,7,6,6,5,5,4,4,3,3,2,2,1,1,12],
         "side":[1,0,1,0,1,0,1,0,1,0,1,0,1,0,1,0,1,0,1,0,1,0,1,0],
         "delta":[0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0]
        },
        {"id":11,"chamber":1,"first":741000,"last":743000,
         "triggerMean":-180.,"triggerMin":-230.,"triggerMax":-150.,
         "stripShift":22,"polarity":1,
         "tdc2strip":[12,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12],
         "side":[1,0,1,0,1,0,1,0,1,0,1,0,1,0,1,0,1,0,1,0,1,0,1,0],
         "delta":[0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0]
        },
        {"id":9,"chamber":1,"first":741000,"last":743000,
         "triggerMean":-180.,"triggerMin":-230.,"triggerMax":-150.,
         "stripShift":33,"polarity":-1,
         "tdc2strip":[12,11,11,10,10,9,9,8,8,7,7,6,6,5,5,4,4,3,3,2,2,1,1,12],
         "side":[1,0,1,0,1,0,1,0,1,0,1,0,1,0,1,0,1,0,1,0,1,0,1,0],
         "delta":[0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0]
        }

</code>

===== Mapping coaxial chamber =====

**Channel 0 is the TDC of trigger**
The strip 13 does not exist.  in this mapping

For calibration you got TDC (channel -1) to Petiroc 
<code>
      firmware2=[24,5,3,1,0,2,4,6,7,8,9,10,26,28,30,31,29,27,25,23,22,21,20,19]
</code>

and TDC to strip

<code>
{"id":5,"chamber":2,"first":741000,"last":743000,
         "triggerMean":-180.,"triggerMin":-230.,"triggerMax":-150.,
         "stripShift":0,"polarity":1,
         "tdc2strip":[13,1,2,3,4,5,6,7,8,9,10,11,12,1,2,3,4,5,6,7,8,9,10,11,12],
         "side":[2,1,1,1,1,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0],
         "delta":[0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0]
        },
        {"id":6,"chamber":6,"first":741000,"last":743000,
         "triggerMean":-180.,"triggerMin":-230.,"triggerMax":-150.,
         "stripShift":12,"polarity":1,
          "tdc2strip":[13,1,2,3,4,5,6,7,8,9,10,11,12,1,2,3,4,5,6,7,8,9,10,11,12],
         "side":[2,1,1,1,1,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0],
         "delta":[0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0]
        },
        {"id":7,"chamber":2,"first":741000,"last":743000,
         "triggerMean":-180.,"triggerMin":-230.,"triggerMax":-150.,
         "stripShift":22,"polarity":1,
         " "tdc2strip":[13,1,2,3,4,5,6,7,8,9,10,11,12,1,2,3,4,5,6,7,8,9,10,11,12],
         "side":[2,1,1,1,1,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0],
         "delta":[0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0]
        },
        {"id":8,"chamber":2,"first":741000,"last":743000,
         "triggerMean":-180.,"triggerMin":-230.,"triggerMax":-150.,
         "stripShift":33,"polarity":-1,
          "tdc2strip":[13,1,2,3,4,5,6,7,8,9,10,11,12,1,2,3,4,5,6,7,8,9,10,11,12],
         "side":[2,1,1,1,1,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0],
         "delta":[0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0]
        }

</code>


===== Data format and software =====

The new data format is explain in [[https://cms.wiki.ipnl.in2p3.fr/upgrade_of_fw_status | this page]]

The detector id of the FEB is now 130


Example of readout of binary data can be found in [[http://git.ipnl.in2p3.fr/mirabito/TdcAnalysis | this git directory]] of my analysis. The  //TdcChannel// class change (FEBCMS tag) to take into account the 6 bytes structure. The //read// method in tdcrb.cxx (FEBCMS tag) is addapted to this new format


===== Daq environnment =====

The configuration used is : **//all_firmware2_1//**

<code>
{
  "HOSTS": {
    "lyocmsrpi02": [
      {
        "ARGS": [], 
        "ENV": [
          "PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin", 
          "DIM_DNS_NODE=lyosdhcal10", 
          "LD_LIBRARY_PATH=/usr/lib:/usr/local/lib:/opt/dhcal/levbdim/lib:/opt/dhcal/lib:/opt/dhcal/DQM4HEP/lib:/opt/dhcal/dim/linux:/opt/dhcal/DQM4HEP/lib:/opt/dhcal/root/lib::/opt/dhcal/lcio/v02-00/lib/:$LD_LIBRARY_PATH", 
          "WEBPORT=42000"
        ], 
        "NAME": "MDCCSERVER", 
        "PARAMETER": {
          "device": "MDCC01", 
          "spilloff": 1000, 
          "spillon": 1000000, 
          "spillregister": 32
        }, 
        "PROGRAM": "/opt/dhcal/bin/lydaq_daemon_Mdcc"
      }, 
      {
        "ARGS": [], 
        "ENV": [
          "LD_LIBRARY_PATH=/opt/dhcal/root/lib:/usr/lib:/usr/local/lib:/opt/dhcal/lib:$LD_LIBRARY_PATH", 
          "WEBPORT=32000"
        ], 
        "NAME": "GENESYS", 
        "PARAMETER": {
          "TCPPort": 5600, 
          "device": "/dev/ttyUSB0", 
          "location": "CERN_904", 
          "period": 30, 
          "port": 6
        }, 
        "PROGRAM": "/opt/dhcal/bin/lydaq_daemon_Genesys"
      }
    ], 
    "lyoilcrpi13": [
      {
        "ARGS": [], 
        "ENV": [
          "LD_LIBRARY_PATH=/opt/dhcal/root/lib:/usr/lib:/usr/local/lib:/opt/dhcal/lib:$LD_LIBRARY_PATH", 
          "WEBPORT=31000"
        ], 
        "NAME": "HIH", 
        "PARAMETER": {
          "TCPPort": 5600, 
          "location": "CERN_904", 
          "period": 30
        }, 
        "PROGRAM": "/opt/dhcal/bin/lydaq_daemon_hih8000"
      }
    ], 
    "lyoilcrpi24": [
      {
        "ARGS": [], 
        "ENV": [
          "LD_LIBRARY_PATH=/opt/dhcal/root/lib:/usr/lib:/usr/local/lib:/opt/dhcal/lib:$LD_LIBRARY_PATH", 
          "WEBPORT=31000"
        ], 
        "NAME": "BMP", 
        "PARAMETER": {
          "TCPPort": 5600, 
          "location": "CERN_904", 
          "period": 30
        }, 
        "PROGRAM": "/opt/dhcal/bin/lydaq_daemon_Bmp"
      }
    ], 
    "lyosdhcal11": [
      {
        "ARGS": [], 
        "ENV": [
          "DIM_DNS_NODE=lyosdhcal11", 
          "LD_LIBRARY_PATH=/usr/lib:/usr/local/lib:/opt/dhcal/levbdim/lib:/opt/dhcal/lib:/opt/dhcal/root/lib:/opt/dhcal/dim/linux:/opt/dhcal/lcio/v02-00/lib/:$LD_LIBRARY_PATH", 
          "WEBPORT=45000"
        ], 
        "NAME": "FDAQ", 
        "PARAMETER": {
          "s_ctrlreg": "0x815A1B40"
        }, 
        "PROGRAM": "/opt/dhcal/bin/lydaq_daemon_Control"
      }, 
      {
        "ARGS": [], 
        "ENV": [
          "PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin", 
          "LD_LIBRARY_PATH=/usr/lib:/usr/local/lib:/opt/dhcal/levbdim/lib:/opt/dhcal/lib:/opt/dhcal/DQM4HEP/lib:/opt/dhcal/dim/linux:/opt/dhcal/DQM4HEP/lib:/opt/dhcal/root/lib::/opt/dhcal/lcio/v02-00/lib/:$LD_LIBRARY_PATH", 
          "WEBPORT=40000"
        ], 
        "NAME": "TDCSERVER", 
        "PARAMETER": {
          "publish": "tcp://lyosdhcal11:5556", 
          "tdc": {
            "db": {
              "mode": "DB", 
              "state": "TDC_RETNEW_9"
            }, 
            "network": "192.168.10."
          }
        }, 
        "PROGRAM": "/opt/dhcal/bin/lydaq_daemon_FebCms"
      }, 
      {
        "ARGS": [], 
        "ENV": [
          "LD_LIBRARY_PATH=/usr/lib:/usr/local/lib:/opt/dhcal/lib:/opt/dhcal/lcio/v02-00/lib/:/opt/dhcal/root/lib:$LD_LIBRARY_PATH", 
          "WEBPORT=51000"
        ], 
        "NAME": "WRITER", 
        "PARAMETER": {
          "dif": 1, 
          "directory": "/data/local/FE1PR2", 
          "processor": [
            "binarywriter", 
            "lydaq_pluggins_monitor"
          ], 
          "shmpath": "/dev/shm/monitor", 
          "stream": [
            "tcp://*:5556"
          ]
        }, 
        "PROGRAM": "/opt/dhcal/bin/lydaq_daemon_Builder"
      }, 
      {
        "ARGS": [], 
        "ENV": [
          "LD_LIBRARY_PATH=/usr/lib:/usr/local/lib:/opt/dhcal/lib:$LD_LIBRARY_PATH", 
          "WEBPORT=36000"
        ], 
        "NAME": "FSLOW", 
        "PARAMETER": {
          "account": "admin/admin@lyoac28", 
          "deviceName": "SY1527@DOMESTAGEM2", 
          "first": 0, 
          "last": 5, 
          "serverName": "tcp://*:5500"
        }, 
        "PROGRAM": "/opt/dhcal/bin/lydaq_daemon_Slow_Control"
      }
    ]
  }, 
  "NAME": "all_firmware2_1"
}
</code>


It requires 4 computers:

  * lyosdhcal11: where all FEB readout, Event building and DAQ control run
  * lyocmsrpi02: It controls the MDCC and the Genesys Low Volatge power supply
  * lyoilcrpi13: It measures the humidity and temperature on 2 HIH8000 probes
  * lyoilcrpi24: It measures temperature and Presssure with a BMP183 probe


Data are stored on ''/data/local/FE1PR2''

==== ASICs configuration ====


The initial configuration with both the return chamber calibrated (TDC_RETNEW_8) and  the 4 FEBs of the coaxial chamber is **TDC_RETNEW_9**

Two runs were use to calibrate those Febs to 480 VTHTIME: 741263 and 741278

Nevertheless the HV was set to 7800 V when it was done and detector noise pollutes those runs.

The new state to be used for cosmic data taking is **TDC_RETNEW_12**

at 1 kV on all chambers we got run 741284

{{ :cern_july18:run741284_allstrip5.png |}}


{{ :cern_july18:run741284_allstrip6.png |}}

{{ :cern_july18:run741284_allstrip7.png |}}

{{ :cern_july18:run741284_allstrip8.png |}}

The return strip chamber is a bit noisy (ground connection to be adjusted) and **the minimal threshold is 504** ( ~ 65 fC)


 --- //[[laurent.mirabito@gmail.com|DAQ user]] 2018/07/05 13:53//
The current environnment  is

<code>

acqilc@lyosdhcal11:~$ slccontrol --slc-ptstatus
          P          T  
     962.00     295.45 
acqilc@lyosdhcal11:~$ slccontrol --slc-humstatus
         H0         T0         H1         T1  
      46.53     294.71      37.14     294.89 

</code>


The start of the acquisition can be done with the //restart_daq// script

<code>
#!/bin/bash
shopt -s expand_aliases
. ${HOME}/.daqrc


daqcontrol --jc-kill
sleep 2
daqcontrol --jc-start
sleep 2
slccontrol --slc-cre;slccontrol --slc-init;slccontrol --slc-conf
sleep 1
slccontrol --slc-lvon
daqcontrol --daq-create
daqcontrol --daq-discover
daqcontrol --daq-service
daqcontrol --daq-initialise

daqcontrol --daq-download --dbstate=TDC_RETNEW_12
daqcontrol --daq-setvth --vth=504
daqcontrol --daq-configure
daqcontrol --trig-spillof --clock=1000
daqcontrol --trig-spillon --clock=10000000
daqcontrol --trig-spillreg --value=32
daqcontrol --trig-setreg --address=7 --value=200000000
#curl -g http://lyosdhcal10:45000/FDAQ/CMD?name=SETTDCMODE\&VALUE=1

</code>

Then a run is started on lyosdhcal11 with

''daqcontrol --daq-start;daqcontrol --trig-resume''

and  stopped with

''daqcontrol --daq-stop''


The last line of //restart_daq// is commented. If one wants to run in trigger mode (only acquisition frame with trigger in are transmitted):

'' curl -g http://lyosdhcal11:45000/FDAQ/CMD?name=SETTDCMODE\&VALUE=1 ''

and go back in normal mode with

'' curl -g http://lyosdhcal11:45000/FDAQ/CMD?name=SETTDCMODE\&VALUE=0 ''

===== Cosmic runs =====

 --- //[[laurent.mirabito@gmail.com|DAQ user]] 2018/07/05 14:13//

HV set to 6500 V on coaxial

High currents

<code>
Bot_Coax     \u2502  6500 V  10.00 uA   6499 V   0.67 uA On                 \u250204.0001 
Top_Coax     \u2502  6500 V  10.00 uA   6499 V   1.98 uA On                 \u250204.0002 
-----        \u25020      V  30.00 uA      0 V   0.00 uA Off                \u250204.0003 
BOT_Return   \u2502  1000 V  10.00 uA   1001 V   0.01 uA On                 \u250204.0004 
TOP_Return   \u2502  1000 V  10.00 uA    998 V   0.02 uA On                 \u250204.0005 
-
</code>

Run 741290 on going (trigger Mode)
IP2I CMS Wiki

User Tools

Site Tools

Page Tools
