IP2I CMS Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Step by Step: Instruction  DOME 2020 =====

==== INFORMATION ====

IPNL local network: ''%%lyoserv.in2p3.fr%%''

DAQ PC: ''%%ssh acqilc@lyocmsmu01 %%'' (pass: RPC_2008)

DATAQUEST PC: ''%%ssh acqilc@lyosdhcal12 %%'' (pass: RPC_2008)

-----

Following **A-B-C** steps to start. **1) 2) 3) 4)** - Convenient ways to setting program.

**NOTES:** 
  - Analysis request setting .csv file with parameters. 
  - Tree output not giving any analysis. It just rewriting .dat with map information. The map must be correct. 
==== PREPARATION ====

**A.** ''%%source ~/CMS-RPC/dataQuest/scripts/create_myDir.sh myName%%'' \\

=== When you create your dir: ===
check that ''%%cd /~CMS-RPC/dataQuest/results/myName%%'' and ''%%cd /~CMS-RPC/dataQuest/cards/myName%%'' exist and you have two .csv files. \\

**Now you can start running the code!** \\

-----

==== ROUTINE ====

Before each analysis with new files copy inputs files : ''%%sdfdsfds%%'' \\

**B.** **''%%cd ~/CMS-RPC/dataQuest/bin%%''** \\ \\

**C.** ** ''%%./dq --type=card  ../cards/myName/default.csv --dir=myName%%'' ** \\
either you run with the default file \\ \\
Or if you want to change the parameters for a given run
N.B: if you want to keep the HV or the threshold information associated to the run and get the corresponding appropriate plots when you perform a scan then you have to provide it in the values parameter as in the following examples: \\  

**1)** ''%%./dq --type=card ../cards/myName/default.csv --dir=myName --runs=741417 --values=6700 --comment=HVOnePoint%%'' \\   
in the previous command, we produce the plots for the run number 741417. The root files will contain the information on the HV and also your comment «HVOnePoint». \\ 

**2)** ''%%./dq --type=card ../cards/myName/default.csv --dir=myName --runs=741383 --values=550 --comment=ThresholdOnePoint%%'' \\   
in the previous command we produce the plots for the run number 741383. The root files will contain the information on the threshold and also your «MyComment = ThresholdOnePoint». \\

**3)** ''%%./dq --type=card ../cards/myName/default.csv --dir=myName --runs='741417|741419' --values='6700|6900' --comment=HVTwoPoints%%'' \\   
If you want to analyse several runs (not in row). Please note the ‘x|y‘ structure. \\

**4)** ''%%./dq --type=card ../cards/myName/default.csv --dir=myName --runs='741417>741420' --values='6700|6800|6900|7000' --comment=HVTwoPoints%%'' \\
If you want to analyse several runs (in a row). \\  
N.B: myComment helps to keep the information of the work to be done (scan,…etc).
-----

==== RESULTS ====

After running the code, a  root file called analysis.root  will be created in ''%% cd ~/CMS-RPC/dataQuest/results/myName%%''.

''%%root%%'' \\
''%%TBrowser *b = new TBrowser();%%'' \\

{{:rate.png?direct&200|}} \\

''%%.q%%'' \\
IP2I CMS Wiki

User Tools

Site Tools

Page Tools
