Differences

This shows you the differences between two versions of the page.

--- instruction_febv1.1b_1020 [2020/10/28 09:47]
acqilc créée
+++ instruction_febv1.1b_1020 [2021/07/10 23:21] (current)
@@ Line 1: / Line 1: @@
-==== Data taking FEBV1 ====
+=== Data taking FEBV1 ===
-Connect to lyocmsmu01
+==== Connect to lyocmsmu01 ====
 * Check job control is running
@@ Line 19: / Line 19: @@
 Everything is in **.daqsetup**
+==== Put LVON ====
+     >>> import genesys
+     >>> s=genesys.genesys("/dev/ttyUSB1",1)
+     /dev/ttyUSB1
+     OK
+     >>> s.status(0)
+     [u'WMV(0.0021)', u'PV(5.0027)', u'MC(000.00)', u'PC(015.33)', u'SR(04)', u'FR(00)\r']
+     >>> s.setOn(0)
+     WOK
+     >>> s.status(0)
+     [u'MV(5.0030)', u'PV(5.0027)', u'MC(005.91)', u'PC(015.33)', u'SR(05)', u'FR(00)\r']
+     >>>
+==== Start a DAQ ====
+===== Spy process of the FEB =====
+In a separate shell
+     alias spyv1='ps -laef | grep lydaq |grep FEBV1 | awk '\''{print "tail -f /tmp/fsmjobPID"$4".log"}'\'' | /bin/bash - '
+When processes are started , just type **spyv1**
+===== Start process and configure them =====
+  JOBSTART
+and to view the processes status
+  VIEW or VIEW -v
+===== Initialise DAQ =====
+   INIT (if not repowered FEB)
+   INIT --dead 7000 ( Send a reset TDC from MDC and wait 7. s before initialising FEB)
+===== LUT Calibration =====
+If power was cycled you have to recalculate LUT fro all channels of FEB and set the measurement masks (./do_lut_calibration)
+   #!/bin/bash
+   source .daqsetup
+   echo " You must have run before 'START;INIT --dead 10000'"
+   # LUT calib
+   combdaq --feb-lutcalib --channel=56 --tdc=0
+    # Measurement mask
+    # 34 channels , channel 19 masked on FEB 15 (adapter issue)
+    combdaq --feb-lutmask --tdc=0 --mask=0x7fff7ffff --feb 15
+    # 34 channels
+    combdaq --feb-lutmask --tdc=0 --mask=0x7ffffffff --feb 14
+===== CONFIGURE the ASICs =====
+====== Download the version you want to use ======
+    mgroc --states (to see the version)
+    combdaq --daq-download --dbstate=CMSRPC_DOME --dbversion=29 --name TDCSERVER
+====== CONFIGURE ======
+     CONFIGURE
+====== Information on the DAQ   ======
+  INFO
+====== Start a pedestal run ======
+     RUN --comment " One test of Pedestal for Ecce and Konstantin channel/channel)"
+     combdaq -M SCURVE -A TDCSERVER -P '{"last":510,"first":450,"channel":1023,"step":2}'
+     INFO ( when no data are received anymore you can stop)
+     STOP
+======= Analysis pedestal =======
+   cd /opt/TdcAnalysis
+   export PYTHONPATH=./scripts/:$PYTHONPATH
+   export LD_LIBRARY_PATH=./lib:$ROOTSYS/lib:/opt/dhcal/lib:$LD_LIBRARY_PATH
+   bin/tdcr  -d/data/local/Oct2020/ -g/opt/TdcAnalysis/dome_geom.json -r1307
+   python -c 'import fitscurve;fitscurve.fitped(1307,14,452,530,2,34)'
+===== Cosmic data taking =====
+In //set_running_cosmic//
+  #!/bin/bash
+  source .daqsetup
+  # Turn normal run MDCC
+  combdaq -M CALIBON -A MDCCSERVER -P '{"value":0}'
+  combdaq -M CALIBOFF -A MDCCSERVER -P '{}'
+  combdaq -M SETCALIBCOUNT -A MDCCSERVER -P '{"nclock":0}'
+  combdaq -M SPILLOFF -A MDCCSERVER -P '{"nclock":100}'
+  combdaq -M SPILLON -A MDCCSERVER -P '{"nclock":20000000}'
+  combdaq -M SETEXTERNAL -A MDCCSERVER -P '{"value":0}'
+  combdaq -M SETSPILLREGISTER -A MDCCSERVER -P '{"value":32}'
+  # Set Thresholds mode and delays
+  combdaq --daq-download --dbstate=CMSRPC_DOME --dbversion=29 --name TDCSERVER
+  combdaq --daq-configure
+  combdaq -M SETVTHTIME -A TDCSERVER -P '{"value":520}'
+  combdaq --daq-configure
+  combdaq -M SETMODE -A TDCSERVER -P '{"value":0}'
+  combdaq -M SETDELAY -A TDCSERVER -P '{"value":3}'
+  combdaq -M SETDURATION -A TDCSERVER -P '{"value":3}'
+The you can start
+  RUN --comment " Mon run a moi qui est super et tres beau"
+  RESUME
+  INFO
+  PAUSE
+  STOP
+Spying the ASIC parameters
+  less /dev/shm/mgroc/CMSRPC_DOME_29.json

IP2I CMS Wiki

User Tools

Site Tools

Differences

Page Tools